100% PASS QUIZ PASS-SURE FORTINET - NSE7_PBC-7.2 - ADVANCED FORTINET NSE 7 - PUBLIC CLOUD SECURITY 7.2 TESTING ENGINE

100% Pass Quiz Pass-Sure Fortinet - NSE7_PBC-7.2 - Advanced Fortinet NSE 7 - Public Cloud Security 7.2 Testing Engine

100% Pass Quiz Pass-Sure Fortinet - NSE7_PBC-7.2 - Advanced Fortinet NSE 7 - Public Cloud Security 7.2 Testing Engine

Blog Article

Tags: Advanced NSE7_PBC-7.2 Testing Engine, NSE7_PBC-7.2 Study Group, NSE7_PBC-7.2 Valid Exam Tips, Latest NSE7_PBC-7.2 Dumps Pdf, NSE7_PBC-7.2 100% Exam Coverage

BONUS!!! Download part of DumpTorrent NSE7_PBC-7.2 dumps for free: https://drive.google.com/open?id=10NMLknXtq9hXnV6l-TE22dylCDFBQh5R

The NSE7_PBC-7.2 web-based practice exam requires no installation so you can start your preparation instantly right after you purchase. With thousands of satisfied customers around the globe, questions of the Fortinet NSE 7 - Public Cloud Security 7.2 (NSE7_PBC-7.2) exam dumps are real so you can pass the Fortinet NSE 7 - Public Cloud Security 7.2 (NSE7_PBC-7.2) certification on the very first attempt. Hence, it reduces your chances of failure and you can save money and time as well. Fortinet exam questions come in three formats i.e., web-based practice test, desktop practice test software, and PDF dumps.

Fortinet NSE7_PBC-7.2 exam is an excellent way for network security professionals to validate their skills and knowledge in public cloud security. It is a rigorous exam that requires a great deal of preparation and study, but passing it can open up new career opportunities and help professionals advance in their careers. With the increasing popularity of public cloud infrastructures, the demand for skilled cloud security professionals is on the rise, making the NSE7_PBC-7.2 exam a valuable credential to have in today's job market.

Fortinet NSE7_PBC-7.2 Exam is designed to test your knowledge and skills in public cloud security. Fortinet NSE 7 - Public Cloud Security 7.2 certification is suitable for professionals who want to demonstrate their expertise in securing cloud environments. NSE7_PBC-7.2 exam is part of the Fortinet Network Security Expert (NSE) program, which is a comprehensive training and certification program that validates your skills in using Fortinet products and solutions.

>> Advanced NSE7_PBC-7.2 Testing Engine <<

NSE7_PBC-7.2 exam dump, dumps VCE for Fortinet NSE 7 - Public Cloud Security 7.2

Now rest assured that with the Fortinet NSE7_PBC-7.2 exam questions you will get the updated version of NSE7_PBC-7.2 exam real questions all the time. You have the option to download updated Fortinet NSE7_PBC-7.2 Exam Questions up to 12 months from the date of Fortinet NSE7_PBC-7.2 exam questions purchase.

Fortinet NSE7_PBC-7.2 Exam is a vendor-neutral certification that is recognized globally. It is an essential certification for IT professionals who want to specialize in public cloud security. Fortinet NSE 7 - Public Cloud Security 7.2 certification exam is based on the latest cloud security technologies and industry best practices. It is designed to help IT professionals enhance their knowledge and skills in public cloud security and stay up-to-date with the latest trends in cloud security.

Fortinet NSE 7 - Public Cloud Security 7.2 Sample Questions (Q32-Q37):

NEW QUESTION # 32
You are troubleshooting an Azure SDN connectivity issue with your FortiGate VM Which two queries does that SDN connector use to interact with the Azure management API? (Choose two.)

  • A. Some queries are made to manage public IP addresses.
  • B. There is only one query initiating from FortiGate port1 -
  • C. The first query is targeted to a special IP address to get a token.
  • D. The first query is targeted to IP address 8.8

Answer: A,C

Explanation:
The Azure SDN connector uses two types of queries to interact with the Azure management API. The first query is targeted to a special IP address to get a token. This token is used to authenticate the subsequent queries. The second type of query is used to retrieve information about the Azure resources, such as virtual machines, network interfaces, network security groups, and public IP addresses. Some queries are made to manage public IP addresses, such as assigning or releasing them from the FortiGate VM. References: Configuring an SDN connector in Azure, Azure SDN connector using service principal, Troubleshooting Azure SDN connector


NEW QUESTION # 33
A customer would like to use FortiGate fabric integration With FortiCNP When configuring a FortiGate VM to add to FortiCNP, which three mandatory configuration steps must you follow on FortiGate? (Choose three.)

  • A. Create an IPsec tunnel.
  • B. Create an SSL]SSH inspection profile.
  • C. Enable two-factor authentication.
  • D. Enable send logs-
  • E. Create and IPS sensor and a firewall policy

Answer: B,D,E

Explanation:
Explanation
To configure a FortiGate VM to add to FortiCNP, you need to perform three steps on FortiGate:
Enable send logs in FortiGate to allow FortiCNP to receive the IPS logs from FortiGate.
Create an SSL/SSH inspection profile on FortiGate to inspect the encrypted traffic and apply IPS protection.
Create an IPS sensor and a firewall policy on FortiGate to enable IPS detection and prevention for the traffic.
References:
FortiCNP 22.4.a Administration Guide, page 22-24
FortiGate IPS Administration Guide, page 9-10


NEW QUESTION # 34
Refer to the exhibit. You are configuring a second route table on a Transit Gateway to accommodate east-west traffic inspection between two VPCs. However, you are getting an error during the transit gateway route table association with the Connect attachment.

Which action Should you take to fulfill your requirement?

  • A. In the second route table: create a propagation with the Connect attachment.
  • B. Add a static route in the Routes section
  • C. Add both Associations and Propagations in the second TGW route table.
  • D. Delete the both Connect and Transport attachments from the first TGW route table

Answer: A

Explanation:
The error message indicates that the Connect attachment is already associated with another transit gateway route table. You cannot associate the same attachment with more than one route table. However, you can propagate the same attachment to multiple route tables. Therefore, to fulfill your requirement of configuring a second route table for east-west traffic inspection between two VPCs, you need to create a propagation with the Connect attachment in the second route table. This will allow the second route table to learn the routes from the Connect attachment and forward the traffic to the security VPC. You also need to associate the second route table with the Transport attachment, which is the transit gateway attachment for the security VPC.


NEW QUESTION # 35
In an SD-WAN TGW Connect topology, which three initial steps are mandatory when routing traffic from a spoke VPC to a security VPC through a Transit Gateway? (Choose three.)

  • A. From the security VPC FortiGate internal subnet routing table, point 0.0.0.0/0 traffic to the TGW.
  • B. From the spoke VPC internal routing table, point 0.0.0.0/0 traffic to the TGW.
  • C. From the security VPC TGW subnet routing table, point 0.0.0.0/0 traffic to the FortiGate internal port.
  • D. From both spoke VPCs, and the security VPC, point 0.0.0.0/0 traffic to the Internet Gateway.
  • E. From the security VPC TGW subnet routing table, point 0.0.0.0/0 traffic to the TGW.

Answer: A,B,C


NEW QUESTION # 36
You are troubleshooting an Azure SDN connectivity issue with your FortiGate VM Which two queries does that SDN connector use to interact with the Azure management API? (Choose two.)

  • A. Some queries are made to manage public IP addresses.
  • B. There is only one query initiating from FortiGate port1 -
  • C. The first query is targeted to a special IP address to get a token.
  • D. The first query is targeted to IP address 8.8

Answer: A,C

Explanation:
Explanation
The Azure SDN connector uses two types of queries to interact with the Azure management API. The first query is targeted to a special IP address to get a token. This token is used to authenticate the subsequent queries. The second type of query is used to retrieve information about the Azure resources, such as virtual machines, network interfaces, network security groups, and public IP addresses. Some queries are made to manage public IP addresses, such as assigning or releasing them from the FortiGate VM. References: Configuring an SDN connector in Azure, Azure SDN connector using service principal, Troubleshooting Azure SDN connector


NEW QUESTION # 37
......

NSE7_PBC-7.2 Study Group: https://www.dumptorrent.com/NSE7_PBC-7.2-braindumps-torrent.html

What's more, part of that DumpTorrent NSE7_PBC-7.2 dumps now are free: https://drive.google.com/open?id=10NMLknXtq9hXnV6l-TE22dylCDFBQh5R

Report this page